Description
Cleaner, Lubricant, & Protectant
- Cleans residue, grime, and carbon deposits.
- Reduce friction between moving parts.
- Shields against corrosion, rust, and wear.
Directions:
Using an CHLP All-In-One Cleaner, Lubricant, and Protectant (CLP) for firearms is a straightforward process. Follow these steps to ensure your firearm is properly maintained:
Materials Needed
- CLP (Cleaner, Lubricant, Protectant)
- Cleaning patches
- Bore brush
- Cleaning rod or pull-through bore snake
- Microfiber cloth or cleaning rag
- Cotton swabs
- Gloves (recommended)
Instructions
1. Ensure Safety
- Unload the Firearm: Make sure the firearm is unloaded. Remove the magazine and check the chamber to ensure there are no rounds present.
- Disassemble the Firearm: Follow the manufacturer’s instructions to disassemble the firearm. Typically, this involves removing the slide, barrel, and other accessible components.
2. Clean the Barrel and Bore
- Apply CHLP: Attach a cleaning patch to the cleaning rod or bore snake, and apply a generous amount of CHLP to the patch.
- Run the Patch Through the Barrel: Insert the cleaning rod or bore snake through the breech end (chamber) of the barrel and pull it through to the muzzle end. Repeat this process a few times to loosen and remove carbon, fouling, and debris.
- Use a Bore Brush: Attach a bore brush to the cleaning rod, apply a small amount of CHLP, and run it through the barrel several times to scrub away stubborn deposits.
- Final Patches: Run clean, dry patches through the barrel until they come out clean.
3. Clean Other Components
- Apply CHLP to Other Parts: Apply a small amount of CHLP to a microfiber cloth or cleaning rag and wipe down all other metal components, including the slide, frame, and magazine.
- Use Cotton Swabs: For hard-to-reach areas, use cotton swabs dipped in CHLP to clean.
4. Lubricate Moving Parts
- Apply CHLP Sparingly: Apply a small amount of CHLP to the moving parts of the firearm, such as the slide rails, trigger mechanism, and any other areas specified by the manufacturer.
- Spread Evenly: Use a clean cloth or your finger (wear gloves if preferred) to spread the CHLP evenly over these parts. The goal is to have a thin, even layer.
5. Protect and Reassemble
- Wipe Down the Exterior: Apply a light coating of CHLP to the exterior surfaces of the firearm to protect against rust and corrosion. Wipe off any excess with a clean cloth.
- Reassemble the Firearm: Follow the manufacturer’s instructions to reassemble the firearm. Ensure all parts are properly aligned and securely in place.
- Function Check: Perform a function check to ensure the firearm operates correctly after reassembly.
6. Store the Firearm
- Store in a Safe Place: Store the firearm in a cool, dry place, preferably in a gun safe or a locked cabinet.
Tips
- Use Sparingly: Less is often more when applying CHLP. Excess lubricant can attract dirt and debris.
- Regular Maintenance: Regularly clean and lubricate your firearm after use to ensure optimal performance and longevity.
- Follow Manufacturer’s Recommendations: Always follow the specific cleaning and maintenance instructions provided by the firearm manufacturer.
By following these steps, you can effectively clean, lubricate, and protect your firearm using CHLP.
Warning:
Harmful if swallowed. Causes skin irritation. Causes serious eye irritation. Wear protective gloves. Wear eye protection / face protection. Wash thoroughly after handling. Do not eat, drink or smoke when using this product, if in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do Continue rinsing. If swallowed: Call a poison center/doctor. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. If on skin: Wash with plenty of water. Take off contaminated clothing and wash it before reuse. Dispose of contents/container in accordance with local/regional/national/international regulations.
Hazardous Ingredient: Hydrocarbon
KEEP OUT OF REACH OF CHILDREN.
